Specialize in Oil Seal, O-Ring & Customize
Rubber Manufacturing Services.
Our factory has been in the vulcanization manufacturing service for almost 20 years
especially in the Engineering, Auto & Building construction industries application.
Our Competitive Advantages
1. Our NBR raw material is imported from JSR, Silicone is from German WACKER, and
also Viton is USA DUPONT.
2. Top quality custom rubber products that can completely meet your needs.
3. Fast production & in-time delivery that never delay your project and usage.
4. One-stop custom service and value-added service to save your time and cost.
5. OEM/ODM Services are available. We can design and produce various Non-standard
Rubber Parts according to your PDF,3D or STEP drawing files.
6. All of rubber finished products are 100% inspected before shipment.
7. Have established rubber property test lab and have tensile strength machine, thermostatic
oil tank, aging test machine, compression set test machine, secondary cure oven, Density
test machine and so on.
Oil Seal Brief Introduction
Oil seal is also known as rotary shaft seal. They are often called grease, fluid or dirt seals.
Oil seal is an integral part in any rotating and moving part assembly. They close spaces between
stationary and moving components in mechanical equipment. An oil seal normally consists of
three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the
Spring. It is a widely used sealing component.
Temperature: -50°C -300°C Depending On Rubber Material
Pressure: Up to 0.03 MPa
Reciprocation Speed: 0-20m/S
Medias: mineral oils, water, lubricating grease
Specification: 6-13000mm
Product Features
Material used for vulcanization process :
--- FKM VITON rubber
--- Nitrile Rubber
--- EPDM Rubber
--- HNBR Rubber
--- Silicone Rubber
--- ACM Rubber
Rubber Vulcanized Profile advantages :
--- Flexi & Durable
--- Weatherproof
--- Good sealing
--- Economical
Product Overviews
Vulcanization workshop & Mold tooling
Warehouse & Package
Customers' Visiting
FAQ
Q 1.Which Payment way is workable?
A: Irrevocable L/C, Cash, PayPal, Credit card and T/T money transfers.
B: 30% T/T deposit in advance, 70% balance before shipment after presentation of ready cargo.
C: L/C ( Irrevocable LC at sight: Order amount over USD10,000)
Q 2. What is the normal lead time for product orders?
A: Average lead times for prototype / first article are 1-2 weeks, if tooling is involved, lead time for production tooling is 10 days, average production time after sample approval is 2-3 weeks.
Q 3. What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.
A2: We have various rubber compounds approved by UL, FDA,, KTW, W270, WRAS, ACS, AS4020, EN681, EN549, ROHS and REACH.
Q 4: How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your needs while keeping material costs in mind.
Q 5: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.
Q 6:Can you supply different color materials?
A: Yes, we can produce custom molded rubber and silicone rubber products in different colors, the color code will be required in case of an order.
Rubber Manufacturing Services.
Our factory has been in the vulcanization manufacturing service for almost 20 years
especially in the Engineering, Auto & Building construction industries application.
Our Competitive Advantages
1. Our NBR raw material is imported from JSR, Silicone is from German WACKER, and
also Viton is USA DUPONT.
2. Top quality custom rubber products that can completely meet your needs.
3. Fast production & in-time delivery that never delay your project and usage.
4. One-stop custom service and value-added service to save your time and cost.
5. OEM/ODM Services are available. We can design and produce various Non-standard
Rubber Parts according to your PDF,3D or STEP drawing files.
6. All of rubber finished products are 100% inspected before shipment.
7. Have established rubber property test lab and have tensile strength machine, thermostatic
oil tank, aging test machine, compression set test machine, secondary cure oven, Density
test machine and so on.
Oil Seal Brief Introduction
Oil seal is also known as rotary shaft seal. They are often called grease, fluid or dirt seals.
Oil seal is an integral part in any rotating and moving part assembly. They close spaces between
stationary and moving components in mechanical equipment. An oil seal normally consists of
three basic components: The Sealing Element (the nitrile rubber part), the Metal Case, and the
Spring. It is a widely used sealing component.
Temperature: -50°C -300°C Depending On Rubber Material
Pressure: Up to 0.03 MPa
Reciprocation Speed: 0-20m/S
Medias: mineral oils, water, lubricating grease
Specification: 6-13000mm
Product Features
| Features | a. Ozone and chemical resistance b. Good temperature resistance c. Excellent weather and water resistance d. Dust resistance and sealing e. Good Compressibility, Flexibility & Elasticity f. Good shock proof |
Material used for vulcanization process :
--- FKM VITON rubber
--- Nitrile Rubber
--- EPDM Rubber
--- HNBR Rubber
--- Silicone Rubber
--- ACM Rubber
Rubber Vulcanized Profile advantages :
--- Flexi & Durable
--- Weatherproof
--- Good sealing
--- Economical
Product Overviews
| Item name | Oil Seal | ||
| lip | Double lips and single lip are available | ||
| Shape | O Type | ||
| Color | Black, brown or as you required | ||
| Pressure | Pressure type | ||
| Working Medium | Hydraulic Oil, Water and Dust | ||
| Payment terms | L/C or T/T /Western Union | ||
| Performance | High temperature resistance,Good oil resistance | ||
| Standard | Nonstandard / Standard | ||
| Hardness | 30-90 | ||
| Factory visit | Available | ||
| Company Type | Manufacturer/Factory & Trading Company | ||
| Origin | China(mainland) | ||
| Hscode | 4016931000 | ||
| Supply | 500000 per/month | ||
Vulcanization workshop & Mold tooling
Warehouse & Package
Customers' Visiting
FAQ
Q 1.Which Payment way is workable?
A: Irrevocable L/C, Cash, PayPal, Credit card and T/T money transfers.
B: 30% T/T deposit in advance, 70% balance before shipment after presentation of ready cargo.
C: L/C ( Irrevocable LC at sight: Order amount over USD10,000)
Q 2. What is the normal lead time for product orders?
A: Average lead times for prototype / first article are 1-2 weeks, if tooling is involved, lead time for production tooling is 10 days, average production time after sample approval is 2-3 weeks.
Q 3. What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.
A2: We have various rubber compounds approved by UL, FDA,, KTW, W270, WRAS, ACS, AS4020, EN681, EN549, ROHS and REACH.
Q 4: How to select the raw compound for my application?
A: With years of experience working with a variety of material, we can help select the material that will best suit your needs while keeping material costs in mind.
Q 5: Do you use any international standards for the rubber products?
A: Yes, we mainly use ASTM D2000 standard to define the quality of the rubber materials, tolerances as per ISO3302, ISO2768, etc.
Q 6:Can you supply different color materials?
A: Yes, we can produce custom molded rubber and silicone rubber products in different colors, the color code will be required in case of an order.